LEW Exam Practice: EMA Licensed Electrician and Technician
Get ready for EMA's written assessment for the licensed electrician and electrical technician licences. Practise the licence rules, electrical calculations, protection, wiring practice and safe isolation, with every answer explained.
100% money back guarantee·1Try free2Pay S$10.003Instant access + email link sent
Question 6Full test
How many classes of electrical worker licence are there in Singapore?
Two
Three
Five
Four
Next question →
No login needed
100% money-back guarantee
Built from the official syllabus and sources
One payment, no subscription
Home › Tests › LEW Exam Practice: EMA Licensed Electrician and Technician
Free test: 5 questions
Try 5 free questions on the electrician's licence limit, Ohm's law, RCDs, safe isolation and your duty to an EMA officer. Each answer comes with a short explanation and the regulation behind it below, no login needed.
Question 1 of 5Free test
5 questionsAbout 6 minInstant feedback
Loading question 1…
Tap an answer to see straight away if it is right, with a full explanation. Your scores are saved on this device only.
What is a Licensed Electrical Worker (LEW)?
In Singapore, electrical work on installations must be done by, or under the supervision of, a Licensed Electrical Worker (LEW). The Energy Market Authority (EMA) issues three classes of licence under the Electricity (Electrical Workers) Regulations: the electrician's licence, the electrical technician's licence and the electrical engineer's licence.
TestReady SG is an independent practice platform. We are not connected to EMA, SP Group or any training provider, and our questions are original practice questions, not the questions in EMA's assessment.
What each licence allows
Licence
Scope
Electrician
Design, install, repair, maintain, operate, inspect and test installations up to 1,000 V and 45 kVA approved load. Install, repair, maintain and operate installations above 45 kVA up to 500 kVA under a technician's supervision.
Electrical technician
Install, repair, maintain, operate, inspect and test installations up to 1,000 V and 500 kVA. Design and submit plans for installations up to 150 kVA.
Electrical engineer
Design, install, repair, maintain, operate, inspect, test and take full charge and responsibility for any electrical installation.
The 1,000 V limit does not apply to electric discharge lighting circuits for electricians, or to design work on them for technicians. All classes may also work as instructed by an authorised high voltage switching engineer.
Who can apply
Electrician: a relevant NITEC plus at least 2 years' relevant experience in Singapore; or at least 10 years' relevant experience; or at least 5 years' experience plus an approved course.
Electrical technician: a diploma in electrical power engineering plus 2 years' experience (or 1 year plus an approved course); or a licensed electrician with 5 years' experience since licensing plus an approved course.
Electrical engineer: a registered professional engineer in electrical engineering with at least 2 years' post-graduate experience in Singapore.
EMA's competency assessment
EMA's guidance describes a written test, a practical test and an interview for the licensed electrician, and a written assessment of 60 multiple-choice questions and 4 structured questions on drawings and designs, followed by a technical interview, for the electrical technician. EMA publishes the current arrangements on its ELISE website, so check the latest guide before you apply.
What our practice test covers
Licences and the Law: licence classes, scope, qualifications, renewal and penalties.
Duties, Supervision and Conduct: supervising others, notices and consents, conditions, suspension and cancellation.
Electrical Principles and Calculations: Ohm's law, power, energy, kVA and power factor, three-phase power and voltage drop.
Protection, Earthing and RCDs: MCBs, RCCBs and RCBOs, earthing and bonding, and the harmonised colour code.
Installation Practice and Wiring: cable selection, derating, IP ratings, polarity, terminations and motor rotation.
Safe Isolation and Testing: the isolation sequence, proving dead, insulation resistance, continuity, polarity and RCD tests.
Key duties under the regulations
Renew your licence no later than one month before it expires.
Give all notices and get all consents the law requires for the work you do or supervise.
Only supervise work your own licence covers, and make sure the people you supervise do not breach the regulations.
Produce your licence and give information when an EMA authorised officer asks. Breaching these duties can lead to a fine of up to $5,000, up to 12 months' jail, or both.
Tell EMA in writing immediately if you change your address.
How to prepare
Learn the numbers. 45 kVA, 150 kVA, 500 kVA, 1,000 V, 230 V and 400 V at 50 Hz come up again and again.
Practise calculations until they are automatic. I = P ÷ V, R = V ÷ I, kVA = kW ÷ power factor and P = √3 × V × I × pf for three-phase loads.
Know safe isolation by heart. Identify, isolate, lock off, prove the tester, test dead, prove the tester again.
Practise until you are steady. Run our timed rounds until you score well every time.
Rules change. Our questions follow the Electricity (Electrical Workers) Regulations and EMA's published worker licence guidance, as checked on 20 October 2026. Always confirm the current assessment format with EMA.
Free study guide by email
What the test covers, how it is marked and how to prepare, for LEW (EMA). One email, no account.
We use your email to send the guide you asked for. Every email has an unsubscribe link. See our Privacy policy.
Get the full LEW practice pack
Every question in the full bank, a clear explanation for each answer, and practice section by section, on your phone or computer.
One-time payment · 30 days access · 100% money-back guarantee
Full access30 days
Licences and the Law21 questions
Duties, Supervision and Conduct15 questions
Electrical Principles and Calculations21 questions
Timed practice102 questions in total, marked at the end
Start
Questions and answers
What can a licensed electrician do in Singapore?
A licensed electrician may design, install, repair, maintain, operate, inspect and test installations up to 1,000 V and 45 kVA, and work on installations above 45 kVA up to 500 kVA under the supervision of an electrical technician.
What is the difference between an electrician, technician and engineer licence?
An electrician works up to 45 kVA on their own, a technician up to 500 kVA (and designs up to 150 kVA), and an electrical engineer can take full charge of any installation. All three are limited to the scope in the Electricity (Electrical Workers) Regulations.
How do I qualify for an EMA electrician licence?
You need a relevant NITEC and 2 years' relevant experience in Singapore, or 10 years' relevant experience, or 5 years' experience plus a course on EMA's approved courses list.
What is in EMA's LEW assessment?
EMA describes a written test, a practical test and an interview for licensed electricians, and a written assessment of 60 multiple-choice and 4 structured questions plus a technical interview for electrical technicians. Check ELISE for the current format.
When must I renew my electrical worker licence?
The renewal application must reach EMA no later than one month before your licence expires.
What voltage is the supply in Singapore?
Singapore's low-voltage supply is 230 V single-phase and 400 V three-phase, at 50 Hz.
Are these the real EMA assessment questions?
No. TestReady SG is an independent practice platform with no link to EMA. Our questions are original, written from the regulations and standard electrical principles.